Same Sector, Different Exposure: India's Steel and the UK CBAM
Updated: Oct 19
First findings: What HMRC's default values and bilateral trade data show when read together in the Trade Law Observatory's UK CBAM Exposure Calculator.

On 16 October 2026, HMRC published a default emissions value for each of the 570 commodity codes within the scope of the UK Carbon Border Adjustment Mechanism (CBAM). From 1 January 2027, an importer that does not have verified emissions data must use a default value.
HMRC's default emissions values are country-agnostic: a tonne of semi-finished steel carries the same value whether it comes from India, Türkiye or Germany. On their own, they say nothing about which trading partners the UK CBAM affects. Read against a country's trade, they might.
This article uses India's steel exports to show how the Trade Law Observatory's UK CBAM Exposure Calculator joins the two, reading India's trade along the supply chain, by scope and over time. The three readings give different answers: the charge per tonne on India's main steel products ranges from about £30 to £75, and the UK takes 3.3% of India's total exports but 27% of its semi-finished steel.
The UK CBAM charge, in brief
From 1 January 2027 the United Kingdom will charge CBAM on the carbon emissions embodied in imported goods. Five sectors are covered: aluminium, cement, fertilisers, hydrogen, and iron and steel.
The charge is worked out in three steps:
Embodied emissions: the quantity of goods multiplied by the emissions figure for the commodity code. Where default values are used, that figure is the published default value.
Charge before relief: the embodied emissions multiplied by the sector rate.
Final charge: the charge before relief, less any eligible carbon price relief.
The sector rate is set each quarter. It starts from the UK ETS carbon price, which is the same for all sectors, and is reduced for the free allowances that domestic producers in each sector still receive. HMRC's illustrative rates of 16 October 2026 are £9.79 (aluminium), £9.69 (iron and steel), £9.24 (hydrogen), £8.78 (cement) and £1.45 (fertiliser) per tonne of CO2 equivalent (tCO2e).
HMRC states that these rates are "illustrative only" and "do not create or imply any tax liability for any business". From 1 January 2027 it will publish rates by the beginning of each quarter.
What the default values signify
On 16 October 2026 HMRC published default emissions values for the 570 commodity codes in scope. From 1 January 2027, an importer without verified emissions data must use them.
An importer may instead use verified data from the installation that produced the goods. Because a default value is set for the commodity code and not for the producer, it gives a higher charge than the producer's own data would where the producer's emissions intensity is below the default, and a lower charge where it is above.
In the Calculator, 100 tonnes of articles of iron or steel (code 7326 9098), at a default value of 3.439 tCO2e per tonne, give embodied emissions of 343.9 tCO2e and, at £9.69 per tCO2e, an indicative charge of £3,332.
The Calculator does not classify goods, test the £50,000 registration threshold or calculate relief, and it is not a CBAM return or advice.
The UK CBAM Exposure Calculator is available here: https://www.tradelawobservatory.com/dashboards
Carbon price relief
Where a carbon price has been paid overseas under a qualifying scheme, the UK charge can be reduced, up to its full amount. HMRC's draft list of qualifying schemes (27 August 2026) names sixteen, including the EU ETS, India's Carbon Credit Trading Scheme (CCTS) and China's national scheme.
Relief equals the emissions embodied in the good multiplied by the effective carbon price, which is the amount the producing installation paid under the scheme divided by its total emissions. A carbon pricing verification form from an accredited independent verifier is required. The regulations and guidance reviewed do not state whether relief is available where default values are used.
Case study: India's steel exports to the UK
For a selected country, the Calculator uses BACI, CEPII's bilateral trade database, to show four measures for 2022 to 2024: exports to the UK, the share of the country's exports going to the UK, its share of UK imports, and its rank among UK suppliers. Each is given for the selected goods, the whole sector, all CBAM-covered goods and all goods.#
#BACI records trade at 6-digit Harmonized System level, while HMRC's list is at 8-digit level, so the figures cover whole headings and are an upper bound for covered goods.
Down the supply chain: one sector, many charges
Table 1. Default values and illustrative charges along India's steel supply chain, 2024 tonnages
Heading | Tonnes to the UK, 2024 | Default value (tCO2e/t) | Estimated charge per tonne (£) |
7207.12 Semi-finished, non-alloy | 123,943 | 3.571–4.748 | 34.60–46.01 |
7224.90 Semi-finished, alloy | 227,793 | 4.802–7.716 | 46.53–74.77 |
7210.49 Zinc-coated flat-rolled | 124,959 | 3.049 | 29.54 |
7308.40 Scaffolding structures | 38,804 | 6.366 | 61.69 |
Default values: the range across the 8-digit codes in each heading. Tonnages: BACI, whole heading. Charges: before relief, at HMRC's illustrative iron and steel rate of £9.69 per tCO2e; an arithmetic illustration, not a forecast. 7224.90: India's exports rose from 36 tonnes in 2022 to 227,793 tonnes in 2024, while the value per tonne fell from about US$11,800 to about US$570, which suggests a change in the goods recorded under the heading; figures for it should be read with caution. Source: Trade Law Observatory calculation from HMRC and BACI data.
Because a default value is set for the code, the charge on India's steel depends on what India ships. Table 1 runs from semi-finished steel to flat-rolled products to fabricated structures. Each stage has its own default value, so the charge per tonne does not rise with processing: £34.60 to £46.01 for semi-finished non-alloy steel, £29.54 for zinc-coated flat steel and £61.69 for scaffolding structures. Within a heading the spread can be wide: in 7224.90 the highest default value (7.716) is 61% above the lowest (4.802), so the 8-digit code declared matters. Where a producer's verified emissions intensity is below the default, the difference, multiplied by the tonnage and the rate, is what verified data would save its UK customer.
The narrower the lens, the larger the exposure
Table 2. India and the UK, by scope, 2024
Scope | Exports to the UK (US$ m) | UK share of India's exports | India's share of UK imports | India's rank |
All goods | 15,120.4 | 3.3% | 2.0% | 14th of 221 |
CBAM goods | 858.5 | 3.3% | 3.7% | 10th of 158 |
Iron and steel | 799.5 | 4.2% | 5.2% | 6th of 147 |
Flat-rolled steel | 242.2 | 6.6% | 8.6% | 6th of 64 |
Semi-finished steel | 222.5 | 27.0% | 30.0% | 1st of 44 |
7224.90 (semi-finished alloy) | 129.7 | 94.6% | 54.1% | 1st of 32 |
Flat-rolled steel: headings 7208 to 7212, 7225 and 7226. Semi-finished steel: headings 7207 and 7224. Shares are by value. On 7224.90, see the note to Table 1. Source: Trade Law Observatory calculation from BACI.
Both shares rise as the scope narrows. The UK takes 3.3% of India's total exports, 4.2% of its iron and steel exports, 27.0% of its semi-finished steel and 94.6% of heading 7224.90. Over the same rows, India's share of UK imports rises from 2.0% to 54.1%, and its rank from 14th to 1st. A country-level figure therefore says little about exposure in a specific product.
A larger share of a smaller market
Table 3. India's iron and steel exports to the UK by product group, 2022 and 2024 (US$ million unless stated)
Product group | 2022 | 2024 | Change |
Articles (chapter 73) | 298.3 | 268.7 | −9.9% |
Flat-rolled | 246.3 | 242.2 | −1.7% |
Semi-finished | 1.9 | 222.5 | from a low base |
Other | 135.0 | 66.0 | −51.1% |
Total | 681.6 | 799.5 | +17.3% |
Total excl. semi-finished | 679.7 | 577.0 | −15.1% |
India's exports to all destinations | 25,678 | 18,996 | −26.0% |
UK share of India's exports | 2.7% | 4.2% | +1.5 points |
Flat-rolled and semi-finished steel as defined under Table 2. Other: the remaining iron and steel headings. Source: Trade Law Observatory calculation from BACI.
Between 2022 and 2024, India's iron and steel exports to all destinations fell 26.0%, while its exports to the UK rose 17.3%. The UK's share of India's steel exports therefore rose from 2.7% to 4.2%. All of the increase came from semi-finished steel, which rose from US$1.9 million to US$222.5 million. Excluding it, exports to the UK fell 15.1%: flat-rolled steel was broadly unchanged (−1.7%), articles fell 9.9% and other iron and steel fell 51.1%.
Other questions the Calculator can help answer
Who else supplies the same goods? For heading 7207.12 in 2024, Germany was the largest UK supplier (22.1% of UK imports), followed by India (19.2%) and the Netherlands (18.8%).
How does a country's position differ by sector? India ranked 6th among UK suppliers of iron and steel in 2024, and 23rd in aluminium.
How does another supplier compare? Türkiye ranked 9th in UK iron and steel imports in 2024, with 4.5%, and sent 3.9% of its steel exports to the UK.[14]
Watch out for...
Rates. The published rates are illustrative, and HMRC states that the input data "is likely to change prior to 1 January 2027".
Quantity. For fertilisers the measure is kilograms of nitrogen contained in the goods, and for four cement codes it is tonnes of clinker.
Trade data. BACI figures are historical, not a forecast of trade after 1 January 2027. Some partners are country groups, weights are missing for some flows, and figures for small exporters and single headings can change sharply between years.
Amendment. HMRC states that a return using default values cannot later be amended with actual emissions data. The guidance reviewed does not say whether the general right to correct errors within three years changes this.
What comes next
Several inputs change from 1 January 2027. Quarterly rates will replace the illustrative figures used in Table 1, and HMRC will publish exchange rates for converting foreign carbon prices into sterling. The draft list of qualifying schemes, which includes India's CCTS, will be kept under review, and HMRC has said it will issue further guidance on reporting actual emissions. The 2022 to 2024 trade figures are the baseline against which trade after the CBAM starts can be compared.
The Calculator is available at https://www.tradelawobservatory.com/dashboards
Sources
HM Revenue & Customs, Check the default values for the Carbon Border Adjustment Mechanism (CBAM), 16 October 2026, and its sector pages.
HM Revenue & Customs, Keeping records for CBAM.
HM Revenue & Customs, Getting the emissions intensity when importing CBAM goods.
Finance Act 2026, Part 5, sections 142 to 158; Schedule 16 (CBAM goods); Schedule 17, Part 2 (registration).
The Carbon Border Adjustment Mechanism (Emissions and Verification) Regulations 2026, SI 2026/995.
The Carbon Border Adjustment Mechanism (Calculation of CBAM Rate and Determination of Carbon Price Relief) Regulations 2026, SI 2026/809.
HM Revenue & Customs, CBAM policy summary.
HM Revenue & Customs, Illustrative CBAM rates and worked example, 16 October 2026.
HM Revenue & Customs, Rates for the Carbon Border Adjustment Mechanism (CBAM), 16 October 2026.
HM Revenue & Customs, CBAM system boundaries document, version 1.00, 10 July 2026, section 1(7).
HM Revenue & Customs, Work out the date you'll need to register for CBAM.
HM Revenue & Customs, UK CBAM: current qualifying carbon pricing schemes, 27 August 2026 (draft list, information as at 19 June 2026).
HM Revenue & Customs, Claiming Carbon Price Relief for CBAM, published 16 July 2026; most recent update recorded 30 September 2026.
CEPII, BACI: International Trade Database at the Product-Level, HS 2022 edition, release 202601, years 2022 to 2024, Etalab Open Licence 2.0; Gaulier, G. and Zignago, S. (2010), BACI: International Trade Database at the Product-Level. The 1994-2007 Version, CEPII Working Paper No. 2010-23.
Contains public sector information licensed under the Open Government Licence v3.0.
Comments